EDIT_PAR COMMAND FILE

DI_MODE         LONG
ED_ENTRY        ACQU
ORDER           FILE


HEADER		"F2 - Acquisition Parameters"
NAME		PULPROG
END
NAME		TD
END
NAME		NS
END
NAME		DS
END
T_NAME		SWH
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1e38
		REL	"SWH=SW*SFO1"
		INV_REL "SW=SWH/SFO1"
		UNIT	"Hz"
		FORMAT	"%14.2f Hz"
		TEXT	"sweep width in Hz"
END
T_NAME          AQ
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1e38
		REL	"AQ=aqcalc(SW,SFO1,TD,DIGTYP)"
		INV_REL	"TD=tdcalc(SW,SFO1,1.0e6*AQ,DIGTYP)"
		UNIT	"sec"
		FORMAT	"%14.7f sec"
                TEXT	"acquisition time"
END
NAME		RG
END
T_NAME          DW
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1e38
		REL	"DW=1/(2*SW*SFO1)"
		INV_REL	"SW=1000000/(2*(0.005+DW)*SFO1)"
		UNIT	"usec"
		FORMAT	"%14.3f usec"
		TEXT	"dwell time "
END
NAME		DE
		FORMAT	"%14.2f usec"
END
T_NAME		CNST2
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -1e38 1e38
		REL	"CNST2=CNST[2]"
		INV_REL	"CNST[2]=CNST2"
		FORMAT	"%14.7f"
TEXT		"= J(CH)"
END
T_NAME		CNST4
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -1e38 1e38
		REL	"CNST4=CNST[4]"
		INV_REL	"CNST[4]=CNST4"
		FORMAT	"%14.7f"
TEXT		"= J(NH)"
END
T_NAME		CNST63
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -1e38 1e38
		REL	"CNST63=CNST[63]"
		INV_REL	"CNST[63]=CNST63"
		FORMAT	"%14.7f"
TEXT		"= 1 steps"
END
T_NAME		d0
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"d0=3u"
		INV_REL	"D[0]=d0"
		UNIT	"sec"
		TEXT	"d0=3u"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		D1
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1e38
		REL	"D1=D[1]"
		INV_REL	"D[1]=D1"
		UNIT	"sec"
		FORMAT	"%14.8f sec"
TEXT		"relaxation delay; 1-5 * T1"
END
T_NAME		d4
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"d4=1s/(cnst2*4)"
		INV_REL	"D[0]=d4"
		UNIT	"sec"
		TEXT	"d4=1s/(cnst2*4)"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		D8
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1e38
		REL	"D8=D[8]"
		INV_REL	"D[8]=D8"
		UNIT	"sec"
		FORMAT	"%14.8f sec"
TEXT		"mixing time"
END
T_NAME		d10
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"d10=in10/2-p1-(p3*2)/3.14159"
		INV_REL	"D[0]=d10"
		UNIT	"sec"
		TEXT	"d10=in10/2-p1-(p3*2)/3.14159"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		d11
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"d11=30m"
		INV_REL	"D[0]=d11"
		UNIT	"sec"
		TEXT	"d11=30m"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		d12
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"d12=20u"
		INV_REL	"D[0]=d12"
		UNIT	"sec"
		TEXT	"d12=20u"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		D16
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1e38
		REL	"D16=D[16]"
		INV_REL	"D[16]=D16"
		UNIT	"sec"
		FORMAT	"%14.8f sec"
TEXT		"delay for homospoil/gradient recovery"
END
T_NAME		d26
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"d26=1s/(cnst4*4)"
		INV_REL	"D[0]=d26"
		UNIT	"sec"
		TEXT	"d26=1s/(cnst4*4)"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		d29
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"d29=in30/2-(p21*2)/3.14159-p3-d10-p1"
		INV_REL	"D[0]=d29"
		UNIT	"sec"
		TEXT	"d29=in30/2-(p21*2)/3.14159-p3-d10-p1"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		DELTA1
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"DELTA1=d4-p18-d16-p8/2"
		INV_REL	"D[0]=DELTA1"
		UNIT	"sec"
		TEXT	"DELTA1=d4-p18-d16-p8/2"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		DELTA2
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"DELTA2=d26-d4"
		INV_REL	"D[0]=DELTA2"
		UNIT	"sec"
		TEXT	"DELTA2=d26-d4"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		DELTA4
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"DELTA4=d0*2+larger(p8,(p22*2+2u))"
		INV_REL	"D[0]=DELTA4"
		UNIT	"sec"
		TEXT	"DELTA4=d0*2+larger(p8,(p22*2+2u))"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		DELTA5
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"DELTA5=d26-d4-p8/2-p13/cnst63"
		INV_REL	"D[0]=DELTA5"
		UNIT	"sec"
		TEXT	"DELTA5=d26-d4-p8/2-p13/cnst63"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		DELTA6
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"DELTA6=p13/cnst63"
		INV_REL	"D[0]=DELTA6"
		UNIT	"sec"
		TEXT	"DELTA6=p13/cnst63"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		DELTA7
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"DELTA7=d26-p18-d16-p13*((cnst63+1)/cnst63)-p3*2-p21*2-d12-15u"
		INV_REL	"D[0]=DELTA7"
		UNIT	"sec"
		TEXT	"DELTA7=d26-p18-d16-p13*((cnst63+1)/cnst63)-p3*2-p21*2-d12-15u"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		DELTA8
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"DELTA8=d4-p18-d16-p8/2+p13/cnst63"
		INV_REL	"D[0]=DELTA8"
		UNIT	"sec"
		TEXT	"DELTA8=d4-p18-d16-p8/2+p13/cnst63"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		in0
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"in0=inf1/2"
		INV_REL	"D[0]=in0"
		UNIT	"sec"
		TEXT	"in0=inf1/2"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		in10
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"in10=inf2/2"
		INV_REL	"D[0]=in10"
		UNIT	"sec"
		TEXT	"in10=inf2/2"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		in29
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"in29=in30-in10"
		INV_REL	"D[0]=in29"
		UNIT	"sec"
		TEXT	"in29=in30-in10"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		IN30
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1e38
		REL	"IN30=IN[30]"
		INV_REL	"IN[30]=IN30"
		UNIT	"sec"
		FORMAT	"%14.8f sec"
TEXT		"1/(2 * SW(N)) = DW(N)"
END
T_NAME		INF1
		TYPE	R64
		CLASS	ACQU
		SUBRANGE 0.0 1e38
		REL	"INF1=INF[1]"
		INV_REL	"INF[1]=INF1"
		UNIT	"usec"
		FORMAT	"%14.2f usec"
		TEXT	"increment for F1"
		NONEDIT
END
T_NAME		INF2
		TYPE	R64
		CLASS	ACQU
		SUBRANGE 0.0 1e38
		REL	"INF2=INF[2]"
		INV_REL	"INF[2]=INF2"
		UNIT	"usec"
		FORMAT	"%14.2f usec"
		TEXT	"increment for F2"
		NONEDIT
END
T_NAME		L9
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1e38
		REL	"L9=L[9]"
		INV_REL	"L[9]=L9"
		FORMAT	"%14.0f"
		TEXT	"loop counter 9"
END
T_NAME		L12
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1e38
		REL	"L12=L[12]"
		INV_REL	"L[12]=L12"
		FORMAT	"%14.0f"
		TEXT	"loop counter 12"
END
T_NAME		L13
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1e38
		REL	"L13=L[13]"
		INV_REL	"L[13]=L13"
		FORMAT	"%14.0f"
		TEXT	"loop counter 13"
END
T_NAME		P4
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1.0e10
		REL	"P4=P[4]"
		INV_REL	"P[4]=P4"
		UNIT	"usec"
		FORMAT	"%14.2f usec"
TEXT		"f2 channel - 180 degree high power pulse"
END
T_NAME		ST1CNT
		TYPE	I32
		SUBRANGE 0 2147483647
		CLASS	ACQU
		REL	"ST1CNT = td1 / (2)"
		INV_REL	"D[0]=ST1CNT"
		UNIT	"no"
		TEXT	"ST1CNT = td1 / (2)"
		FORMAT	"%14d"
		NONEDIT
END
T_NAME		ST2CNT
		TYPE	I32
		SUBRANGE 0 2147483647
		CLASS	ACQU
		REL	"ST2CNT = td2 / (2)"
		INV_REL	"D[0]=ST2CNT"
		UNIT	"no"
		TEXT	"ST2CNT = td2 / (2)"
		FORMAT	"%14d"
		NONEDIT
END
T_NAME		TAU
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"TAU=d8-p19*2-d16*2-p3-50u"
		INV_REL	"D[0]=TAU"
		UNIT	"sec"
		TEXT	"TAU=d8-p19*2-d16*2-p3-50u"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		TAU2
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"TAU2=(p8-p2)/2"
		INV_REL	"D[0]=TAU2"
		UNIT	"sec"
		TEXT	"TAU2=(p8-p2)/2"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		TAU3
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"TAU3=(p8-p22*2-2u)/2"
		INV_REL	"D[0]=TAU3"
		UNIT	"sec"
		TEXT	"TAU3=(p8-p22*2-2u)/2"
		FORMAT	"%14.8f sec"
		NONEDIT
END
NAME		ZGOPTNS
		TEXT 	"options for zg"
END
HEADER		"======== CHANNEL f1 ========"
NAME		NUC1
		NONEDIT
		TEXT	"nucleus for channel 1"
END
T_NAME		P1
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1.0e10
		REL	"P1=P[1]"
		INV_REL	"P[1]=P1"
		UNIT	"usec"
		FORMAT	"%14.2f usec"
TEXT		"f1 channel -  90 degree high power pulse"
END
T_NAME		p2
		TYPE	R32
		SUBRANGE -1e38 1e38
		CLASS	ACQU
		REL	"p2=p1*2"
		INV_REL	"D[0]=p2"
		UNIT	"usec"
		TEXT	"p2=p1*2"
		FORMAT	"%14.2f usec"
		NONEDIT
END
T_NAME		P17
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1.0e10
		REL	"P17=P[17]"
		INV_REL	"P[17]=P17"
		UNIT	"usec"
		FORMAT	"%14.2f usec"
TEXT		"f1 channel - trim pulse                        [4 msec]"
END
T_NAME		P61
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1.0e10
		REL	"P61=P[61]"
		INV_REL	"P[61]=P61"
		UNIT	"usec"
		FORMAT	"%14.2f usec"
TEXT		"H2O flipback pulse"
END
T_NAME		PL1
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -6.0 1e38
		REL	"PL1=PL[1]"
		INV_REL	"PL[1]=PL1"
		UNIT	"dB"
		FORMAT	"%14.2f dB"
TEXT		"f1 channel - power level for pulse (default)"
END
T_NAME		PL10
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -6.0 1e38
		REL	"PL10=PL[10]"
		INV_REL	"PL[10]=PL10"
		UNIT	"dB"
		FORMAT	"%14.2f dB"
TEXT		"f1 channel - power level for TOCSY-spinlock (trim pulse)"
END
T_NAME		PL1W
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -6.0 1e38
		REL	"PL1W=59*pow(10.0,(-6-PL[1])/10.0)"
		INV_REL	"PL[1]=-6-4.3425*log(PL1W/59)"
		UNIT	"no"
		FORMAT	"%14.8f W"
TEXT		"f1 channel - power level for pulse (default)"
END
T_NAME		PL10W
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -6.0 1e38
		REL	"PL10W=59*pow(10.0,(-6-PL[10])/10.0)"
		INV_REL	"PL[10]=-6-4.3425*log(PL10W/59)"
		UNIT	"no"
		FORMAT	"%14.8f W"
TEXT		"f1 channel - power level for TOCSY-spinlock (trim pulse)"
END
NAME		SFO1
		FORMAT	"%14.7f MHz"
		TEXT	"frequency of observe channel"
END
HEADER		"======== CHANNEL f2 ========"
NAME		CPDPRG2
		TEXT	"file name for cpd2"
END
NAME		NUC2
		NONEDIT
		TEXT	"nucleus for channel 2"
END
T_NAME		P3
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1.0e10
		REL	"P3=P[3]"
		INV_REL	"P[3]=P3"
		UNIT	"usec"
		FORMAT	"%14.2f usec"
TEXT		"f2 channel -  90 degree high power pulse"
END
T_NAME		P8
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1.0e10
		REL	"P8=P[8]"
		INV_REL	"P[8]=P8"
		UNIT	"usec"
		FORMAT	"%14.2f usec"
TEXT		"f2 channel - 180 degree shaped pulse for inversion (adiabatic)"
END
T_NAME		P13
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1.0e10
		REL	"P13=P[13]"
		INV_REL	"P[13]=P13"
		UNIT	"usec"
		FORMAT	"%14.2f usec"
TEXT		"f2 channel - 1 pulse"
END
T_NAME		PCPD2
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0 1e38
		REL	"PCPD2=PCPD[2]"
		INV_REL	"PCPD[2]=PCPD2"
		UNIT	"usec"
		FORMAT	"%14.2f usec"
TEXT		"f2 channel - 90 degree pulse for decoupling sequence"
END
T_NAME		PL0
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -6.0 1e38
		REL	"PL0=PL[0]"
		INV_REL	"PL[0]=PL0"
		UNIT	"dB"
		FORMAT	"%14.2f dB"
TEXT		"120dB"
END
T_NAME		PL2
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -6.0 1e38
		REL	"PL2=PL[2]"
		INV_REL	"PL[2]=PL2"
		UNIT	"dB"
		FORMAT	"%14.2f dB"
TEXT		"f2 channel - power level for pulse (default)"
END
T_NAME		PL12
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -6.0 1e38
		REL	"PL12=PL[12]"
		INV_REL	"PL[12]=PL12"
		UNIT	"dB"
		FORMAT	"%14.2f dB"
TEXT		"f2 channel - power level for CPD/BB decoupling"
END
T_NAME		PL0W
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -6.0 1e38
		REL	"PL0W=335*pow(10.0,(-6-PL[0])/10.0)"
		INV_REL	"PL[0]=-6-4.3425*log(PL0W/335)"
		UNIT	"no"
		FORMAT	"%14.8f W"
TEXT		"120dB"
END
T_NAME		PL2W
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -6.0 1e38
		REL	"PL2W=335*pow(10.0,(-6-PL[2])/10.0)"
		INV_REL	"PL[2]=-6-4.3425*log(PL2W/335)"
		UNIT	"no"
		FORMAT	"%14.8f W"
TEXT		"f2 channel - power level for pulse (default)"
END
T_NAME		PL12W
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -6.0 1e38
		REL	"PL12W=335*pow(10.0,(-6-PL[12])/10.0)"
		INV_REL	"PL[12]=-6-4.3425*log(PL12W/335)"
		UNIT	"no"
		FORMAT	"%14.8f W"
TEXT		"f2 channel - power level for CPD/BB decoupling"
END
NAME		SFO2
		FORMAT	"%14.7f MHz"
		TEXT	"frequency of observe channel"
END
T_NAME		SP13
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -6.0 120
		REL	"SP13=SP[13]"
		INV_REL	"SP[13]=SP13"
		UNIT	"dB"
		FORMAT	"%14.2f dB"
TEXT		"f2 channel - shaped pulse 180 degree (adiabatic)"
END
T_NAME		SP26
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -6.0 120
		REL	"SP26=SP[26]"
		INV_REL	"SP[26]=SP26"
		UNIT	"dB"
		FORMAT	"%14.2f dB"
TEXT		"f2 channel - 1 shaped pulse (adiabatic)"
END
T_NAME		SP13W
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -6.0 1e38
		REL	"SP13W=335*pow(10.0,(-6-SP[13])/10.0)"
		INV_REL	"SP[13]=-6-4.3425*log(SP13W/335)"
		UNIT	"no"
		FORMAT	"%14.8f W"
TEXT		"f2 channel - shaped pulse 180 degree (adiabatic)"
END
T_NAME		SP26W
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -6.0 1e38
		REL	"SP26W=335*pow(10.0,(-6-SP[26])/10.0)"
		INV_REL	"SP[26]=-6-4.3425*log(SP26W/335)"
		UNIT	"no"
		FORMAT	"%14.8f W"
TEXT		"f2 channel - 1 shaped pulse (adiabatic)"
END
NAME		SPNAM13
		TEXT	"file name for sp0"
END
NAME		SPNAM15
		TEXT	"file name for sp0"
END
NAME		SPNAM26
		TEXT	"file name for sp0"
END
T_NAME		SPOAL13
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -1.0 1.0
		REL	"SPOAL13=SPOAL[13]"
		INV_REL	"SPOAL[13]=SPOAL13"
		FORMAT	"%14.3f"
		TEXT	"phase alignment of freq. offset in SP13"
END
T_NAME		SPOAL15
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -1.0 1.0
		REL	"SPOAL15=SPOAL[15]"
		INV_REL	"SPOAL[15]=SPOAL15"
		FORMAT	"%14.3f"
		TEXT	"phase alignment of freq. offset in SP15"
END
T_NAME		SPOAL26
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -1.0 1.0
		REL	"SPOAL26=SPOAL[26]"
		INV_REL	"SPOAL[26]=SPOAL26"
		FORMAT	"%14.3f"
		TEXT	"phase alignment of freq. offset in SP26"
END
T_NAME		spoffs13
		TYPE	R32
		SUBRANGE -1e38 1e38
		CLASS	ACQU
		REL	"spoffs13=0"
		INV_REL	"D[0]=spoffs13"
		UNIT	"Hz"
		TEXT	"spoffs13=0"
		FORMAT	"%14.2f Hz"
		NONEDIT
END
T_NAME		SPOFFS15
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -1e38 1e38
		REL	"SPOFFS15=SPOFFS[15]"
		INV_REL	"SPOFFS[15]=SPOFFS15"
		UNIT	"Hz"
		FORMAT	"%14.2f Hz"
		TEXT	"offset frequency for SP15"
END
T_NAME		SPOFFS26
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -1e38 1e38
		REL	"SPOFFS26=SPOFFS[26]"
		INV_REL	"SPOFFS[26]=SPOFFS26"
		UNIT	"Hz"
		FORMAT	"%14.2f Hz"
		TEXT	"offset frequency for SP26"
END
HEADER		"======== CHANNEL f3 ========"
NAME		CPDPRG3
		TEXT	"file name for cpd3"
END
NAME		NUC3
		NONEDIT
		TEXT	"nucleus for channel 3"
END
T_NAME		P21
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1.0e10
		REL	"P21=P[21]"
		INV_REL	"P[21]=P21"
		UNIT	"usec"
		FORMAT	"%14.2f usec"
TEXT		"f3 channel -  90 degree high power pulse"
END
T_NAME		p22
		TYPE	R32
		SUBRANGE -1e38 1e38
		CLASS	ACQU
		REL	"p22=p21*2"
		INV_REL	"D[0]=p22"
		UNIT	"usec"
		TEXT	"p22=p21*2"
		FORMAT	"%14.2f usec"
		NONEDIT
END
T_NAME		PCPD3
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0 1e38
		REL	"PCPD3=PCPD[3]"
		INV_REL	"PCPD[3]=PCPD3"
		UNIT	"usec"
		FORMAT	"%14.2f usec"
TEXT		"f3 channel - 90 degree pulse for decoupling sequence"
END
T_NAME		PL3
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -6.0 1e38
		REL	"PL3=PL[3]"
		INV_REL	"PL[3]=PL3"
		UNIT	"dB"
		FORMAT	"%14.2f dB"
TEXT		"f3 channel - power level for pulse (default)"
END
T_NAME		PL16
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -6.0 1e38
		REL	"PL16=PL[16]"
		INV_REL	"PL[16]=PL16"
		UNIT	"dB"
		FORMAT	"%14.2f dB"
TEXT		"f3 channel - power level for CPD/BB decoupling"
END
T_NAME		PL3W
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -6.0 1e38
		REL	"PL3W=330*pow(10.0,(-6-PL[3])/10.0)"
		INV_REL	"PL[3]=-6-4.3425*log(PL3W/330)"
		UNIT	"no"
		FORMAT	"%14.8f W"
TEXT		"f3 channel - power level for pulse (default)"
END
T_NAME		PL16W
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -6.0 1e38
		REL	"PL16W=330*pow(10.0,(-6-PL[16])/10.0)"
		INV_REL	"PL[16]=-6-4.3425*log(PL16W/330)"
		UNIT	"no"
		FORMAT	"%14.8f W"
TEXT		"f3 channel - power level for CPD/BB decoupling"
END
NAME		SFO3
		FORMAT	"%14.7f MHz"
		TEXT	"frequency of observe channel"
END
HEADER		"====== GRADIENT CHANNEL ====="
NAME		GPNAM1
TEXT		"SINE.100"
END
NAME		GPNAM2
TEXT		"SINE.100"
END
NAME		GPNAM3
TEXT		"SINE.100"
END
NAME		GPNAM4
TEXT		"SINE.100"
END
NAME		GPNAM5
TEXT		"SINE.100"
END
NAME		GPNAM6
TEXT		"SINE.100"
END
NAME		GPNAM7
TEXT		"SINE.100"
END
T_NAME		GPZ1
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -100.0 100.0
		REL	"GPZ1=GPZ[1]"
		INV_REL	"GPZ[1]=GPZ1"
		UNIT	"%"
		FORMAT	"%14.2f %"
TEXT		"30%"
END
T_NAME		GPZ2
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -100.0 100.0
		REL	"GPZ2=GPZ[2]"
		INV_REL	"GPZ[2]=GPZ2"
		UNIT	"%"
		FORMAT	"%14.2f %"
TEXT		"40%"
END
T_NAME		GPZ3
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -100.0 100.0
		REL	"GPZ3=GPZ[3]"
		INV_REL	"GPZ[3]=GPZ3"
		UNIT	"%"
		FORMAT	"%14.2f %"
TEXT		"16%"
END
T_NAME		GPZ4
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -100.0 100.0
		REL	"GPZ4=GPZ[4]"
		INV_REL	"GPZ[4]=GPZ4"
		UNIT	"%"
		FORMAT	"%14.2f %"
TEXT		"60%"
END
T_NAME		GPZ5
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -100.0 100.0
		REL	"GPZ5=GPZ[5]"
		INV_REL	"GPZ[5]=GPZ5"
		UNIT	"%"
		FORMAT	"%14.2f %"
TEXT		"-36%"
END
T_NAME		GPZ6
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -100.0 100.0
		REL	"GPZ6=GPZ[6]"
		INV_REL	"GPZ[6]=GPZ6"
		UNIT	"%"
		FORMAT	"%14.2f %"
TEXT		"16%"
END
T_NAME		GPZ7
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -100.0 100.0
		REL	"GPZ7=GPZ[7]"
		INV_REL	"GPZ[7]=GPZ7"
		UNIT	"%"
		FORMAT	"%14.2f %"
TEXT		"50%"
END
T_NAME		p16
		TYPE	R32
		SUBRANGE -1e38 1e38
		CLASS	ACQU
		REL	"p16=1m"
		INV_REL	"D[0]=p16"
		UNIT	"usec"
		TEXT	"p16=1m"
		FORMAT	"%14.2f usec"
		NONEDIT
END
T_NAME		P18
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1.0e10
		REL	"P18=P[18]"
		INV_REL	"P[18]=P18"
		UNIT	"usec"
		FORMAT	"%14.2f usec"
TEXT		"homospoil/gradient pulse                       [1 msec]"
END
T_NAME		p19
		TYPE	R32
		SUBRANGE -1e38 1e38
		CLASS	ACQU
		REL	"p19=3m"
		INV_REL	"D[0]=p19"
		UNIT	"usec"
		TEXT	"p19=3m"
		FORMAT	"%14.2f usec"
		NONEDIT
END
T_NAME		p29
		TYPE	R32
		SUBRANGE -1e38 1e38
		CLASS	ACQU
		REL	"p29=4m"
		INV_REL	"D[0]=p29"
		UNIT	"usec"
		TEXT	"p29=4m"
		FORMAT	"%14.2f usec"
		NONEDIT
END